How To Level A Front Loading Washing Machine | bestwashingmachinex.com

Level the Washer

1

Unplug the front-loading washing machineHow to Level a Front Loading Washing Machine. Check when the feet from the washer are securely on the floor. If they are not, use the wrench to extend them until they reach the floor and provide a solid base.

2

Place the level on the washer parallel with the front in the washerHow to Level a Front Loading Washing Machine. When the bubble is to the left of the center line, raise the right legs until it reads level (bubble between two center lines); when the bubble is to the right of center, raise the left legs. If the bubble lies between the two center lines, go to the next step.

3

Place the level on the washer parallel with the side from the washer. When the bubble is towards the front with the washer, raise the back legs; if the bubble is towards bestwashingmachinex.com the back from the washer, raise the front legs.

4

Use the shims if you are unable Remove washing machine odor to level the washer with the legs fully extended, or if you are unable to get the legs to reach the floor. Slide the shims along the floor, under the leg that needs to be raised further or that is not reaching the floor, until it touches the leg. Give it a little extra push to set it in securely. Snap off the remainder from the shim that is sticking out. Plastic shims have pre-cut lines and will snap cleanly when you pull up. For wood shims, slice across the shim with the utility knife a couple of times and pull up. It is going to snap at the line you cut.

5

Check the level from the washer again in both directions. You may need to make small adjustments in the legs back and forth until it is fully level.

How To Level A Front Loading Washing Machine | bestwashingmachinex.com
How To Buy A Washing Machine | bestwashingmachinex.com